Description
This is the Nut Buster 3000 Handlebar Plate Kit. One part. One job: connect your handlebar clamp/connector plate to the Nut Buster chassis so you have some hope of steering your questionable decisions with confidence. It’s also built to play nicely with a bunch of common scoot pump connector plates, because we believe in compatibility.
What it is
A universal-ish handlebar interface plate for the Nut Buster 3000
The Handlebar Plate Kit is a metal mounting plate with multiple bolt patterns/slots that work with the Nut Buster 3000 handlebar system and can accommodate a variety of other scoot pump handlebar connector plates. This is the interface that makes it all bolt together.
Bolt pattern compatibility
Designed to fit a variety of connector plates
The Nut Buster handlebar plate provides multiple mounting options:
- Side A: Oval slots covering approximately 85mm to 95mm bolt spacing
- Side B: Two fixed positions at 75mm and 90mm bolt spacing
Translation: many common scoot pump handlebar connector plates will bolt up with minimal drama, and “minimal drama” is the best we can offer in a product called Nut Buster. Worst case you wind up drilling extra holes.
Why you might need a replacement
We genuinely don’t know
This part should be indestructible. It’s a thick metal plate. It doesn’t flex. It doesn’t do anything heroic. It just sits there and quietly enables your life choices.
So if you’re buying a replacement, here are the most plausible scenarios:
- A lake otter stole it: They have no respect for precision hardware.
- Your significant other hid it: Not out of spite – out of your self-preservation.
- A friend tried skipping it: They wanted to see if it would skip across the water like a skipping stone. It won’t.
- You created a parts pile: “I’ll remember where I put it” is a lie we all tell ourselves.
What’s included
Just the plate.
- Includes: Nut Buster 3000 Handlebar Mounting Plate (replacement part)
- Does not include: handlebar, clamp/connector plate, hardware, or any additional common sense
- Colors may vary from the images.
Compatibility
Made for Nut Buster 3000 and adaptable scoot pump builds
This plate is intended for Nut Buster 3000 owners replacing a missing piece, and for riders using their own scoot pump handlebar connector plates that match the supported bolt spacing options above.
Order Fulfillment
If you’re looking for “expedited,” you are in the wrong place
Around here, fulfillment runs on Notorious D.C. Time. When an order comes in, we’ve gotta check with D.C. to see when he can fabricate your part, and he’s usually armpit-deep in a car restoration when the message hits. If you want anodizing, that’s an extra adventure lining up a shop that’ll do a small job: the part is forged in his lair, shipped out for its shiny armor upgrade, and returns ready for action.
Translation: don’t be in a rush. Lead times can be weeks for a single part, and a complete kit can take a month or two, depending on the build queue and finishing steps. If you were under the impression that these are stamped out on a Chinese factory assembly line or that there are boxes of spare parts lying around, you would be sadly mistaken. The upside? You’re getting custom-made gear, not mass-produced mystery metal.
Bottom line
If you need this, we have questions
The Handlebar Plate Kit is the “how did you lose/break this” replacement part. It’s tough, flexible in bolt patterns, and quietly essential. If you’re ordering one, we want to hear the story. Either way, bolt it on, tighten it down, and try not to let it go again.
